Icon825

1. Switch on Fast Feet using the On Switch on the control panel.
2. Wait for the arena to light up and display ESA on the scoreboard.
3. On your phone, tablet or computer, open your WiFi settings and connect to the Fast Feet WiFi network. The network will appear as esaIconxxx, where xxx identifies your unit. The WiFi can take up to 2 minutes to become visible.
4. When prompted, enter the WiFi Code shown on this page.
5. Once connected, open your internet browser.
6. Open the FrontPanel URL shown on this page.
7. From the interface, select your preferred training mode and adjust the session settings as required.

Once connected, use the FrontPanel to control your Fast Feet.

1. Select your preferred training mode from the interface.
2. Adjust the available settings, such as duration and number of targets, to suit your session.
3. Select Start to begin the training mode.
4. Do not change the training mode while a game is running. Either stop the game or wait until it has finished before selecting another mode.
5. During the session, the interface will display a live scoreboard, including the score and remaining time. This information is also shown on the arena display.
6. Use the Start/Stop button to start or stop the session.
7. To log in, select Not logged in and follow the login process using your provided username and password.

Having trouble connecting?

If the Fast Feet WiFi network does not appear immediately, allow up to 2 minutes for it to become visible.

Make sure your phone, tablet or computer is connected to the Fast Feet WiFi before attempting to open the FrontPanel, Leaderboard or Teltonika interface.

Connecting Fast Feet to the internet

1. Connect your device to the Fast Feet WiFi.
2. Open the Teltonika URL shown on this page in your browser.
3. Log in using the Teltonika Username and Teltonika Code shown on this page.
4. Select Network, then Wireless.
5. Select Scan to search for available local WiFi networks.
6. Select the network you want to connect to and enter its WiFi password.
7. Make sure Enable is switched on in the general setup settings.
8. Save and apply the changes.
   

Your selected WiFi network should then appear within the Teltonika wireless network settings.