Icon833

Connect to your ICON V2

1. Switch on your ICON V2 using the power button on the control panel.
2. Wait for the arena to light up and display ESA on the scoreboard.
3. On your phone, tablet or computer, open your WiFi settings and connect to the ICON V2 WiFi network. The network will appear as esaIconxxx, where xxx identifies your unit. Please allow up to 2 minutes for the WiFi network to become visible.
4. When prompted, enter the WiFi Code shown on this page.
5. Once connected, open your internet browser.
6. Open the FrontPanel URL shown on this page.
7. Select your preferred training mode and adjust the session settings as required.

Once connected, use the FrontPanel to control your ICON V2.

1. Select your preferred training mode from the interface.
2. Adjust the available settings, including session duration and number of targets, to suit your training session.
3. Select Start to begin the training mode.
4. Do not change the training mode while a game is running. Stop the current game or wait until it has finished before selecting another mode.
5. During your session, the interface will display a live scoreboard showing your score and remaining time. This information is also shown on the arena display.
6. Use the Start/Stop button to start or stop your session.
7. To log in, select Not logged in and follow the login process using your provided username and password.

ICON V2 Assembly and Setup

Before using your ICON V2, ensure the equipment has been correctly assembled.

1. Position the control panel near a suitable power source and arrange the panels in their numbered order.
2. Connect the panels using the supplied acrylic joiners and rubber washers, forming the circular structure.
3. Attach the half-size Pro Panels and Press attachments in their correct numbered positions.
4. Connect the longer extension panels using the supplied nuts and bolts, tightening them with the provided spanner. Ensure a rubber washer is positioned between the panels.
5. Attach the Range panels at the two furthest points of the ICON V2.
6. Check that the beam breakers on the extended panels are correctly aligned. The laser must reach the reflector on the opposite side.
7. Connect all panel cables before connecting the ICON V2 to its power source. Ensure the connectors are securely attached without forcing them.
8. Once all panels and cables are secure, connect the ICON V2 to the power source using the socket at the bottom left of the master panel.

Having trouble connecting?

If the ICON V2 WiFi network does not appear immediately, allow up to 2 minutes for it to become visible.

Make sure your phone, tablet or computer is connected to the ICON V2 WiFi before attempting to open the FrontPanel, Leaderboard or Teltonika interface.

Connecting your ICON V2 to the internet

To view player data and information, your ICON V2 needs to be connected to a local internet network.

1. Connect your device to the ICON V2 WiFi.
2. Open the Teltonika URL shown on this page in your browser.
3. Log in using the Teltonika Username and Teltonika Code shown on this page.
4. Select Network, then Wireless.
5. Select Scan to search for available local WiFi networks.
6. Select the network you want to connect to and enter its WiFi password.
7. Make sure Enable is switched on in the general setup settings.
8. Save and apply the changes.

Your selected WiFi network should then appear within the Teltonika wireless network settings.