Icon847

Connect to your ICON Q

1. Switch on your ICON Q and allow it to start fully.
2. On your phone, open Settings → WiFi.
3. Select your machine's WiFi network.
4. Enter the WiFi Code shown on this page.
5. Once connected, open your internet browser.
6. Select the FrontPanel URL shown on this page to access the machine controls.

Assembling your ICON

1. Choose a level installation area with sufficient space, clear of obstructions.
2. Position Control Panel No. 1 closest to the power source.
3. Lay the remaining panels flat on the floor in ascending numerical order, arranged clockwise from the control panel.
4. Prepare the acrylic joiners and rubber washers. Each rubber washer sits between two ICON panels and is held in place by an acrylic joiner.
5. Starting from the control panel, connect panel number 2, followed by panel number 3 and the remaining panels in sequence.
6. Secure the joiners through the holes at the top and bottom of the panels, ensuring a rubber washer is positioned between each panel.
7. Once the joiners are secured, connect the cables. Each cable connects to the panel immediately to the left of the panel it came from.
8. Thread each cable through the hole at the centre of the panel join. Align the connector's four pins with the corresponding socket, insert them and gently twist the connector to secure it.
9. Connect the ICON to the power source using the bottom socket on the left side of the master panel.
10. Check that all joiners and cables are securely connected before operating the equipment.

Training Modes

The general ICON guide describes three training modes.

Knockout: Hit all the illuminated blue targets as quickly as possible. Speed, accuracy and one-touch ability are important.

Vision: Hit the blue target to score a point. An orange light indicates where the next blue target will appear. Hit as many blue targets as possible within the time limit.

King of the Ring: Two teams compete to hit an illuminated target belonging to the opposing team. Players use passing and skills to get past defenders. The round duration and number of rounds can be adjusted.

Having trouble connecting?

Your phone says "No Internet Connection"

This is normal when connected directly to the machine's WiFi. You can still access the FrontPanel, Leaderboard and Teltonika interfaces through your browser.

Cannot open the FrontPanel or Leaderboard?

Make sure your phone is connected to the machine's WiFi before opening the relevant URL.

Cannot access Teltonika?

Check that your phone is connected to the machine's WiFi and that you are entering the correct Teltonika credentials.

If your browser displays a connection security warning when opening Teltonika, the supplied connection guide explains that this warning can appear and provides instructions for proceeding to the interface.

Connecting your ICON Q to external WiFi

You can control the machine locally without connecting it to an external internet network.

An external internet connection is needed when the machine must communicate externally, such as when ESA Support needs to check background settings or diagnose a fault remotely.

To connect the machine to your venue or office WiFi:

1. Connect your phone to the machine's WiFi.
2. Open the Teltonika URL shown on this page.
3. Log in using the Teltonika credentials shown on this page.
4. Scan for available WiFi networks.
5. Select your venue or office WiFi network.
6. Enter the network password and connect.